新的mdx-540有许多的升级功能特色，其中包括更多的曲面设计及快速运算处理，也改善了平滑及有效率的工作台面等功能，几乎所有的零组件和功能均已经升级到最好的性能，甚至每一次加工曲面和圆形的表面都可达到完美的质量，mdx-540的特色是结合通常只有大型较贵的nc机器才有的数位伺服马达及dac-ffp，此先进的技术以确保能够提供最佳的扭力及快速生产成品。



产品介绍

规格参数

使用方法

扫二维码用手机看

model	mdx-540	mdx-540a
可雕刻	plastic, resin and light metal
xyz-axis 行程	500mm (x) x 400mm (y) x 155mm (z) (19.6(x) x 15.7(y) x 6.1(z)in.)	400mm (x) x 400mm (y) x 155mm (z) (15.7(x) x 15.7(y) x 6.1(z)in.)
从主轴到工作台面的距离	maximum 254 mm (10in.)
工作台面范围尺寸	550mm (w) x 420mm (d) (21.7(w) x 16.5(d)in.)
可装载的材质重量	at acceleration of 0.2g: maximum 12kg (26lb.), 0.1g: 20kg (44lb.), 0.05g: 20kg (44lb.)
xyz-axis驱动系统	ac servo motor, 60w
操作速度	maximum 7.5m/min (295in./min)
加速度	0.2g, 0.1g, 0.05g
软件分辨率	rml-1 mode: 0.01mm (0.0004in.), nc-code mode: 0.001mm (0.00004in.)
机械分辨率	0.001mm (0.00004in.)
距离精度	±0.1mm/300 mm (±0.004in./12in.), under no-load conditions
重复精度	±0.05mm (±0.002in.), under no-load conditions
原点再生精度（当电源关掉再开启）	±0.05mm (±0.002in.)
主轴马达	dc brushless motor, maximum 400w
主轴转速	400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
夹头	collet method, maximum tool diameter: 10mm (0.4in.)	tool holder format, taper shank: jbs4002 15t 7/24 taper; pull stud: jbs4002 15p (45°), special
语法控制	rml-1 and nc codes
传输界面	usb (compliant with universal serial bus specification revision 1.1)
电源供应	voltage and frequency: ac 100 to 120 v/220 to 240 v ±10%, 50/60 hz required power capacity: 7a (100 to 120v)/4a (220 to 240v)
电源功率	approx. 700w
噪音值	during operation (no cutting): 65db (a) or less, during standby: 40db (a) or less (according to iso 7779)
机器外观尺寸	width x depth x height: 745 x 955 x 858mm (29.3 x 37.6 x 33.8in.)
机器重量	102kg (225lb.)	109kg (240lb.)
操作温度	5 to 40°c (41 to 104°f)
操作湿度	35 to 80% (no condensation)
机器配件	handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, roland software cd-rom, srp player cd-rom, user's manual, roland software software guide, srp player installation and setup guide, and nc code reference manual	handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, roland software cd-rom, srp player cd-rom, user's manual, roland software software guide, srp player installation and setup guide, nc code reference manual, and automatic tool changer (refer to the zat-540 specs below.)

自动换刀（zat-540）详细规格
使用刀具数	4
刀具最大长度	110 mm (4.3 in.)
刀具最大直径	10 mm (0.4 in.)
刀具最大重量	350 g (0.77 lb.)
刀柄规格	taper shank: jbs4002 15t 7/24 taper. pull stud: jbs4002 15p (45 ), special.
刀具选择方式	direct-changing type, fixed-address specification
需求气压	0.7 to 1.0 mpa, 50 l/min or higher
主轴转速	400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
重量	6.8 kg (15 lb.) (total weight including spindle, magazine, control box, etc.)
配件	control box, magazine unit, atc spindle, air cylinder, base plate, z-origin sensor, spacer, cap screws, hexagonal wrenches, retaining bands, cable retainers, and user's manual

*当使用换刀模块，mdx-540的x-axis行程如下：

- standard table, no rotary axis unit: 400 mm (15.7 in.)
- standard table, rotary axis unit present: 270 mm (10.6 in.)/325 mm (12.7 in.) (with expanded x-axis travel)
- t-slot table, no rotary axis unit: 400 mm (15.7 in.)
- t-slot table, rotary axis unit present: 203 mm (7.9 in.)/258 mm (10.1 in.) (with expanded x-axis travel)

旋转轴（zcl-540）详细规格
支持的工作材质	resin (metal not supported)
最大的旋转角度	±21,474,836.47 (±59,652.3 turns)
可使用的工作材质尺寸*1	items within the range of a 90 mm (3.5 in.) in radius from the center of the rotary axis by 371 mm (14.6 in.) long. the actual cuttable range is smaller than this.
可使用工作材质的厚度	15 to 100 mm (0.6 to 3.9 in.)
可使用工作材质重量	maximum 5 kg (11 lb.), maximum moment of inertia: 0.02 kgm2 center drill used: maximum 1.5 kg (3.3 lb.)
控制方式	simultaneous 4-axis control
进给速率	feed rate maximum 20 rpm
软件分辨率	rml-1 mode: 0.1, nc-code mode: 0.01
机械分辨率	0.002
固定精度	backlash: 0.05 , eccentricity: 0.3 mm (0.012 in.) or less
机器外观尺寸	720 mm (w) x 100 mm (d) x 195 mm (h) [28.3 (w) x 3.9 (d) x 7.7 (h) in.]
重量	6.5 kg (14.5 lb.) (total weight including drive unit, tailstock, base plates, etc.)
配件	drive unit, tailstock, base plates, live center, center drill, y-origin sensor, z-origin sensor, spacer, origin-detection pin, cap screws, t-slot nuts, hexagonal wrenches, retaining band, and user's manual

when the t-slot table is installed, the length is 297 mm (11.7 in.).
when this unit is installed, the x-axis travels of the mdx-540 are as follows:
- standard table, no atc unit: 285 mm (11.2 in.)/325 mm (12.7 in.) (with expanded x-axis travel
- standard table, atc unit present: 270 mm (10.6 in.)/325 mm (12.7 in.) (with expanded x-axis travel)
- t-slot table, no atc unit: 218 mm (8.5 in.)/258 mm (10.1 in.) (with expanded x-axis travel)
- t-slot table, atc unit present: 203 mm (7.9 in.)/258 mm (10.1 in.) (with expanded x-axis travel)

roland srp player软件需求规格
操作系统	windows® 2000/xp and internet explorer 6.0 or later
cpu	pentium® 4 recommended
內存和硬盘空间	1gb (ram) or more and 20mb (hdd) are recommended